For the Innofader Pro, please see
Numark M1 and M1USB Installation with Innofader Pro on our forum.
For the Innofader Pro2, this is a standard installation. Please refer to
Figure 11 External Power Adapter Example.
Note on some earlier production the adapter 17 is wired backwards. Please make sure that it is wired as shown below with the wires going straight across rather than crossing over when plugged in. To fix this, use the mini screwdriver included with the Pro2 to pull out the J48 socket and rotate it 180 degrees. If you need help with this, please
mail us and we'll help you out.
