Find my fader / Allen and Heath
Install details

Allen and Heath Xone:92

Crossfader only
Buy Innofader Pro2 → Buy mini Innofader Plus →

Installation notes

  • Requires adapter plate included with the Innofader kit
  • Multiple Innofader models will work for this mixer. The preferred model is listed first based on the best performance / cost tradeoff.
  • Also fits the original Innofader Pro. Please follow the instructions for VCA hookup

Detailed installation

Either the Innofader PNP, Pro2, or Innofader Pro will work seamlessly with the Xone:92. For the Innofader Pro, please use the J40 adapter.

The only trick to the installation is since the Innofader is wider than the slot, you can't assemble it to the plate and plug it in. You need to add 3 washers to each side of the Innofader, and you need to slide it into the slot at an angle. Keep holding onto the stem so it doesn't fall into the slot. Thread one side to one side of the Innofader to the A&H/Stanton fader plate included with the Innofader, slide it over so the fader plate mounts properly, then pull te stem back up and thread the other side of the Innofader.

This YouTube video might be helpful: https://youtu.be/x_gIfMtjOAE

Here's a picture of the Installation with special thanks from DJ Korea. It's in Korean, but at least you can get an idea from the installation images.

← Search another mixer