***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Crossfader Only |
_______________________________________________ |
|  |
| SUGGESTED HEIGHT ADJUSTMENT: Lower by 1.0mm.
More info |
| ADAPTER BOARD (included): Adapter (16) + (11) |
| USE 8 PIN NOISE FILTER CABLE (included): More info |
| ADAPTER EXTERNAL POWER: Please see Innofader Pro2 Instructions
|
| OPTIMAL CURVE DIAL SETTING: 12:00 |
| |
_______________________________________________ |
Installation Notes: |
| Requires wiring modification using mini flathead screwdriver included with the fader. Please see mixer specific instructions for more detail. |
| Please also order the Innojuster to get a full range of curves. |
Installation Detailed Description: |
For the Innofader Pro, see the forum instructions here.
If you are using an Innofader Pro2, simply follow the installation as indicated in Figure 11 External Power Adapter Example. The power connection should be routed as shown below:
 |
