For the Innofader Pro and Pro2:
Make sure you use the insulated screws and washers during installation as shown
here.
For the Innofader Pro2: If you wish to install the Innofader Pro2 for channel faders, please use the POWER I/O connection as shown in Figure 12
here.
For the Innofader Pro: Please do the
Ecler Eternal Installation mod fix For channel fader installation, the original Innofader includes special circuitry for allowing a 3 Innofader installation in this mixer as shown
here.
For the original Innofader: Use the ECLER ETERNAL ADAPTER.