The VMC 185 XL installation is very similar to the
VMC-002 installation. Once you have removed the original Vestax crossfader, the next step is disconnect the original 2 wire red and white cable from this point:
Connect the two wire red and black cable included with the Innofader Pro2. Plug this into the adapter (7) as shown here:
 extension.jpg)
You will need an additional 2 wire red and black cable to reach adapter (14). Please
email us and we'll help arrange getting this cable sent to you. The final step is connecting all of the following to adapter 14:
1) Free end of the 2 wire red and black Innofader Pro2 cable
2) free end of the the 2 wire red and white Vestax cable
3) 5 pin Vestax crosfader cable.
The result will look like this to adapter (14) as shown here:
 hookup.jpg)
If you are patient taking apart the mixer, an alternative is disconnect the the 2 wire red and white Vestax cable from the opposite end. This way the adapter (7) and added red and black cable would not be needed. The only drawback of doing this is you would need to remove the main PC board from the top panel. Please
email us for assistance if you would like to use this installation method.