Install details

Ecler HAK 310

Crossfader and channel faders
Buy Innofader Pro2 →

Installation notes

  • Fader body and adapter must be fully isolated from internal circuits with insulating screws and insulating washers.
  • Please see here for more details on this installation.

Detailed installation

The Innofader Pro2 or Innofader Pro are required for proper crossfader operation since the reverse switch reverses power to the crossfader. When using the Innofader Pro, please also make sure to isolate the Innofader circuitry from the mixer as shown here: Innofader electrical isolation

The original Innofader limits the output to 5V which prevents the sound output from cutting out on one side.Previously we had an Innofader Output Adapter board to work with this model, but it didn't work for crossfader reverse. The Innofader Pro resolves this issue.

← Search another mixer