***PURCHASE AN INNOFADER:*** |
|
|
FADER SLOT: Channel Faders |
Please see here for crossfader details. |
|
_______________________________________________ |
| |
SUGGESTED HEIGHT ADJUSTMENT: Lower by 0.5mm.
More info |
ADAPTER BOARD (included): Adapter (3) |
OPTIMAL CURVE DIAL SETTING: 12:00 |
SPECIAL Y CURVE SETTING recommended for channel fader installation. More Info |
|
_______________________________________________ |
Installation Notes: |
Requires power from the Innofader crossfader (cable included with the fader) |
Fader body and adapter must be fully isolated from internal circuits with insulating screws and insulating washers. |
Use 1.2mm raised cap to prevent the knob from scraping against the faceplate (full bodied Innofader models only) |
Installation Detailed Description: |
For the Innofader Pro2: If you wish to install the Innofader Pro2 for channel faders, please use the POWER I/O connection as shown in Figure 12 here.
|